This section will explain how to unpack and setup your A522.01 for initial use, and provide some guidance for continued use.
Unpack all the items from the supplied shipment case. You should have the following items:
| Qty | Item |
|---|---|
| 1 | PACE A522.01 |
| 1 | AC (UK) Power Cable |
Once you have unpacked the Pace A522, check the unit looks like the images below. The colour of your unit may be different to that show below. Check the details plate on the underside of the unit and check the information matches the table below.
| Product Code | 810-0836 |
|---|---|
| Product Name | A522.01 |
| Serial Number | Unique per unit |
<aside> 💡
Note - check that the details on the plate shown above match those in the table below. If they don’t please reach out to the Antillion Customer Support Team via the PACE 360 portal.
</aside>
Front View
Rear View
VGA and USB-3 Type A
Connect the keyboard and mouse using the USB-3 Type A connectors on the front panel. Connect your monitor to the VGA port using a standard VGA cable (NOT supplied with the unit)
Pace Drive(s)
PACE A522.01 has six (6) Pace Drive slots. The disk(s) you ordered will be installed into your Pace platform for shipping. Any slots not populated will be covered with a dummy drive and can be purchased in the future.
<aside> 💡
If you configured your A522.01 with a RAID card this will installed and disks connected, ready for you to configure and use.
</aside>